|
|
|
German Daggers Dot Com
German Daggers Dot Com
Uniform & Accessories
The Honor Ring Forum
dak ring|
Go
![]() |
New
![]() |
Find
![]() |
Notify
![]() |
Tools
![]() |
Reply
![]() |
|
hi, would you please give your opinions
on this ring.the seller says that it is original.i hope this link works. thanks mike http://www.militaria321.com/auktionsdetails. cfm?auctionid=5443761 |
|||
|
![]() ![]() |
|
|||
|
![]() ![]() |
There's another of this style ring on that site, but listed in the Replica section: http://www.militaria321.com/auktionsdetails.cfm?auctionID=5292793
|
|||
|
hi,all.
is there no one out there who can give me his opinian on this ring? i have spoken to the seller who claims he obtained it from his father who was in the dak. it is marked 900 and one other mark which cannot be maked out. it is identical to the repro ring that is on the same site, even down to the small hole on the top of the ring, so i am not sure about it. any help would be most welcome. thanks mike |
||||
|
![]() ![]() ![]() |
Mike,..The 2 rings in BadBobs links are reproductions.. Forget about stories. A good ring will speak out to you and tell you its own story!
*Study the photos in the links ,,you'll see a fault line going around the whole ring ,outside and inside! These fault lines are from the rubber mold that makes the wax model. Originals were not made like that... Here is a bigger shot of the fake: ![]() |
|||
|
![]() ![]() ![]() |
Mike, when the rings come out of the rubber molds there usually is some fault lines from the seam you must split to get the model out.. The jeweler smooths these out and gets rid of any other faults before it gets cast..
The wax moldels here are a high quality and very liitle of a fault remains. The 2 rings from the links are the poorest looking reproductions i've seen in a while,,the maker didn't either bother to get rid of the lines! If your interested in how 99% of the fakes are made do a internet search on 'Lost Wax Cast'. ![]() |
|||
|
many thanks, folk can save a fortune by checking
rings on this forum. i was;nt sure about this ring so i;m glad i asked for your help. mike |
||||
|
| Previous Topic | Next Topic | powered by eve community |
| Please Wait. Your request is being processed... |
|

