Tranlsate German to English - Click here to open Altavista's Babel Fish Translator Click here to learn about all those symbols by people's names.

leftlogo.jpg (20709 bytes)



Go
New
Find
Notify
Tools
Reply
  
  Login/Join 
Picture of Steven C.
Posted
I don't know if something similar has ever been posted in the past. Here's something of an unfinished roll from a factory, I believe. The large swaz is 4'8" across, the two smaller at the bottom are 14" across. The measurements are taken from the dotted lines across. You can see where it repeats itself on the roll. I know some of you have seen this in the past. It shows good use of material, ink, time and little to no waste. The largest center I've ever seen across was 12'. That had to have been a large flag. I hope it can shed some light on how things were made at the time. Comments are more than welcome. Thanks, Steve.

1
 
Posts: 253 | Location: Ft. Worth, Texas | Registered: 16 March 2006Reply With QuoteEdit or Delete MessageReport This Post
Picture of Steven C.
Posted Hide Post
Pic 2

2
 
Posts: 253 | Location: Ft. Worth, Texas | Registered: 16 March 2006Reply With QuoteEdit or Delete MessageReport This Post
Picture of Steven C.
Posted Hide Post
Pic 3

4
 
Posts: 253 | Location: Ft. Worth, Texas | Registered: 16 March 2006Reply With QuoteEdit or Delete MessageReport This Post

Yahoo IM
Posted Hide Post
thats really neat!
 
Posts: 423 | Location: In a bunker deep beneath Texas | Registered: 20 January 2006Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
Manions has had a couple of these this past year
on the auction site.... these are very easy to '''make''' so to speak...
 
Posts: 52 | Location: Cleveland, Tn. | Registered: 01 June 2006Reply With QuoteEdit or Delete MessageReport This Post
Picture of Steven C.
Posted Hide Post
Mark, do you remember what they sold for on Manions? This one I've had for six or more years. It does pass the black light test. I thought it was kind of neat to see it in that stage. Any additional information would be helpful. Thanks, Steve.
 
Posts: 253 | Location: Ft. Worth, Texas | Registered: 16 March 2006Reply With QuoteEdit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community  
 


Site images not be used without our written permission.

Click to Visit